K2 Stucco in powder microspheres 5 kg high thickness ultra white for interior

High quality powder putty with ceramic microspheres, for high thicknesses, extra white, for interiors.

K2 Plus putty? a dry mortar composed of selected alabaster gypsum, very pure, finely ground calcium carbonate, ceramic microspheres and specific additives to improve adhesion to the substrate and workability. under the tool.

Fields of use
K2 Plus powder putty? a wisely calibrated mortar to perform important jobs where it is necessary to thicken in a few hands and the application is smooth under the tool without tiring the operator. ? useful for finishing plasterboard and brick walls plastered with gypsum, obtaining very smooth surfaces. For lime-based and chin-based surfaces, it is recommended to apply a coat of K2 Acril Fix primer before applying the grout or to make sure that the plaster is well cured.

Technical features:
Density of powder: 750? About 50 kg / m3
Grain size: less than 0.15 mm
Mixing water: about 49%
Application temperature: from +5? C to +40? C
Useful life of the mix: 90 minutes at about 20 ° C
Setting time: about 10 minutes at 20 ° C

Preparation of the base:
the surface of the substrates must be free from dust, loose limbs of old mortars, saline efflorescence and any traces of oils, greases, waxes, etc., must be removed in advance.

Preparation of the dough and processing:
the K2 Plus powder putty must be mixed with clean water, the agitation can? be carried out with a low-speed mechanical stirrer or by hand. Stir until you get a creamy, lump-free paste.

Use K2 Plus in its original state, without the addition of foreign materials.
The processing takes place with a metal spatula in pi? horizontal and vertical passages, any subsequent processing can be carried out only when the previous layer? completely dry. Before applying paints and tapestries, make sure that the stucco layer is perfectly hardened and dry, avoiding exposing it to severe temperature changes in the heating of the rooms.

Warnings
It is advisable not to apply the mortar at a temperature below +5 ° C and to consider this value as the minimum application temperature and for good hardening of the grout.

Storage:
the material if stored in dry rooms on wooden pallets for about 6/8 months. 5 kg pack.

In the shop there are other accessories, spare parts and products in colored abrasive adhesives.
Also contact us to receive free estimates.