Cuver vernice smalto sintetico lucido grigio perla 0,750 lt per ferro legno muro vari colori per esterno (Grigio Perla N.9)

Cuver synthetic glossy bottom-finish enamel, anticorrosive, high solid, with good characteristics of brushability and ease of application, it is suitable for any type of substrate
It can be used on both wood and iron.

FOR IRON:

Clean and degrease the support, sand the rusty or detached parts, apply a coat of CUVER ANTIRUGGINE.
After 16-18 hours, apply CUVER SMALTO in one or two stages at intervals of 16-18 hours.

FOR WOOD:

New wood: Check that the humidity of the wood does not exceed 15%. Sand and apply one or two coats of CUVER IMPREGNANTE.

Painted wood: On substrates already treated with impregnating agent that are not excessively degraded, it is sufficient to sand. On degraded substrates, remove the layers of old paint, sand and bring the wood back to new in order to avoid uneven absorption of the substrate and apply one or two coats of CUVER IMPREGNANTE ALL'ACQUA.

TECHNICAL SPECIFICATIONS:

Dilution: For brush application: ready to use.
Theoretical coverage: 12-14 m2 / L per coat depending on the dilution.
Overcoating: 24-36 hours at 20 ° C.
Drying: (at 20 ° C; relative humidity 60%).
Dust dry: 25-40 minutes.
Out of touch: 1-2 hours.
Complete: 24-28 hours.
0.750 lt pack.

Other accessories, abrasive products, adhesives and colors are available in the shop.
For more information, do not hesitate to contact us.