Cuver glossy water-based acrylic white enamel for wood iron wall interiors and exteriors 750 ml yield 10-12 m2/l

Glossy water-based enamel Cuver white 750 ml.

Odorless glossy water-based enamel, based on acrylic resins in emulsion. It has high brilliance, washability, elasticity and resistance to outdoor use. It is particularly suitable for hospitals, schools, offices, public places and environments where it is not always possible to have good ventilation.

The product must be applied with a minimum temperature not lower than +5° and with a maximum temperature not higher than +40°. Do not apply on surfaces in direct contact with sunlight. Keep the undiluted product in cool places. Storage stability 24 months. The diluted product must be kept tightly closed, away from heat or sunlight for no longer than three days. During the handling and use of the aforementioned paint product, the regulations prescribed by law for the protection of the applicator and the environment in the use of paint products must be observed. Keep out of reach of children; do not eat, drink or smoke and ensure good ventilation during use; do not throw the residues in the sewers. Any mixing alters the technical characteristics and qualities of the product.

Characteristics:
- Odorless glossy water-based enamel.
- Based on: Acrylic resins in emulsion.
- Suitable for: Iron, wood, masonry, galvanized sheet metal, asbestos cement and PVC after appropriate preparation of the substrate.
- Application: Brush, roller, spray.
For brush application: 5-10% with water;
For roller application: 5-10% with water;
For spray application: 10-20% with water.
- Yield: 10-12 m2/l.
- 750ml bottle.
- White color.

Surface preparation.
New wood: Check that the humidity of the wood does not exceed 15%. Sand and apply a coat of CUVER IMPREGNANTE ALL'ACQUA TRASPARENTE or CUVER FONDO UNIVERSALE.
Varnished wood: Make sure that the old varnish is solid, remove the non-adherent parts, sand and apply a coat of CUVER IMPREGNANTE ALL'ACQUA TRASPARENTE or CUVER FONDO UNIVERSALE.
New iron: Thoroughly clean the support. Allow the rust to form to destroy the scale then brush vigorously. If you want to increase resistance outdoors, apply a coat of CUVER FONDO UNIVERSALE.
Painted iron: Thoroughly clean the support. Sand and roughen the covered parts. If you want to increase resistance outdoors, apply a coat of CUVER FONDO UNIVERSALE.
New wall: Make sure that the plaster and/or gypsum is not fresh, damp, brittle or chalky; apply a coat of a wall water-based sealer.
Painted wall: Brush well and remove the old paint that is not perfectly clinging to the support. Eliminate any traces of mold by disinfecting and then brushing the wall dry. Grout where necessary and insulate the grouted parts, then proceed as for new walls.
For the use of CUVER SMALTO LUCIDO ALL'ACQUA on substrates other than those indicated above, it is always advisable to carry out preliminary tests to verify its adhesion. Indeed, in some cases it is possible to apply CUVER SMALTO LUCIDO ALL'ACQUA directly, in others it is necessary to apply a specific primer.