This website uses cookies to give you the best experience. By using this website you consent to the use of the cookies.
Built-in Toro wall-mounted electronic safe for hotels cm31x20x20h door 5 mm
Description
TORO electronic safe
5 mm thick steel door
Steel anti-cut bolts
Electronically controlled safety lock
Dimensions mm 310x200x200h
Shelves: 1
Bolts: 2
Made with high quality steel and painted with
epoxy powder
Great security thanks to 100,000,000 combinations
Equipped with emergency key
To open the safe
to. Enter the code (the original code set is "1,5,9")
b. Press "A" or "B"
c. After the green LED comes on, turn the key or knob within 5
seconds (if present, turn the handle first).
d. Pull the hatch to open the safe.
NOTE:
Each time a key is pressed, a yellow LED will flash and an acoustic
signal will sound; this indicates that the microprocessor has
confirmed the entry.
If the yellow LED continues to flash and the acoustic signal is
heard again, the code is wrong.
If an incorrect code is entered three times, the microprocessor
will refuse to accept further entries for 20 seconds.
If an incorrect code is entered three more times, the
microprocessor will lock out for 5 minutes.
TO CLOSE THE SAFE
Close the hatch and turn the knob (if there is a handle, place it
vertically)
TO SET AND CHANGE YOUR PERSONAL CODE
to. With the hatch open, pressing the red button will turn on the
yellow LED.
b. Enter your personal code within 30 seconds (3-8 bits)
c. Press "A" or "B" to finish the operation.
NOTE:
If the yellow LED continues to flash and the acoustic signal is
heard again, the code is wrong.
To change the personal code, repeat the operations described
above.
HOW TO USE THE EMERGENCY KEY
In case you forget your personal code:
to. Remove the emergency cover located near the knob,
b. Insert the emergency key and turn left,
c. Turn the knob (if there is a handle, turn it first)
d. The hatch will open
WARNING: NEVER LEAVE THE EMERGENCY KEY INSIDE THE SAFE.
REPLACING THE BATTERIES
Switching on of the red LED together with the green one indicates
that the battery needs to be replaced.
NOTE: Make sure you have inserted the battery correctly before
closing the hatch.
PICTURE:
Knob or key = knob or key
Override key= emergency key
Override Cover= emergency cover
Green led = green led
Yellow led = yellow led
Red led = red led
d. The hatch will open